DIA TREE SHIELD For 1/64 to 1/43 SCALE and LAP DISPLAY

This DIA 1/64 Scale Tree Shield is connected from the Main DIA unit with the 6P6C  Data cable and has output for single 15 Pin plug to the Starting Tree. Designed for 1/43 to 1/64 DIA Trees & our DIA LAP DISPLAY.  Simply plug 6P6C cable into back of unit, and plug the 15 Pin on your 1/64 Scale Tree into the connection. When using for LAP DISPLAY you MUST plug the Display cable from LAP Display into the LEFT Side of the Shield.  Board is mounted below track area. If you need to mount on side of track please e-mail or call us for special wire harness.  Unit is sold without Data Cables.

NOTE: DISPLAY SHIELD ONLY TREE AND CABLE NOT INCLUDED !

SOLD 1 x pc