The DIA Thermal “TIME SLIP” Printer is the best think to come along for Slot car and timings systems. Simply plug the printer into the DIA main unit and after each race you are now able to print of your Racing Time Slip ! Time Slip Results will show all the data you need to improve your race and keep a record of wins. The Printer is powered directly from the DIA unit so no extra power supplies are needed. Results will show: Car Class, Scale, Tree Type, Dial-In, RT, 60ft-660-Finish Times, ET, MPH/KPH, Winning Lane, Hole-shots, Date, Time, and Temperature. Unit measures: 75x75x63mm  5-7 vdc

NOTE: This printer ONLY works with our DIA MAIN UNIT and may not be compatible with other systems.

Packing Contents: 1 x 58mm Mini Embedded Receipt Thermal Printer Compatible with EML203, 1 x Power Cable 6P6C and 1 Roll of Thermal Paper.

● Compatible with APS ELM203-CH
● Easy paper structure and replace the paper body from front panel, easy for operation
● Low noise thermal printing, do not brother the others, creating quiet environment
● Optional different interface
● Easily embedded in a variety of different instruments
● Printing method: Thermal
● Resolution: 8 dots / mm, 384 dots / line
● Effective print width: 48mm
● Character set: ASCII,  Prints in American
● Print fonts: ANK: 5 x 7, Chinese: 12 x 24, 24 x 24
● Paper type: Thermal paper
● Paper width: 57.5 +/- 0.5mm
● Roll diameter: 40mm ( max )
● Reliability: Mean Cycle Between Failure ( MCBF ) 500 million lines
● Interface: Serial 6P6C Data Cable
● Embed depth: 34.65mm
● Power supply ( Adapter ): DC 5V – 7V
● Operating temperature: 5 Deg.C – 50 Deg.C
● Humidity 10 percent to 80 percent
● Storage temperature: -20 Deg.C – 60 Deg.C
● Storage humidity: 10 percent to 90 percent
● Print speed: 60 – 80mm / s
●  Time, Date & Temp Printout


There are no reviews yet.

Be the first to review “THERMAL “TIME SLIP” PRINTER TTL 5-7 VDC”